features applications ? sip package, 0.86 x 0.36x 0.44 inch ? 1600vdc input to output isolation and 3000vdc for op tion ? continuous short circuit protection ? safety meets ul60950-1, en60950-1, iec60950-1 ? ce mark meets 2006/95/ec, 2011/95/ec and 2004/108/ec ? compliant to rohs eu directive 2011/65/eu wireless network telecom/datacom industry control system measurement equipment semiconductor equipment technical specification all specifications are typical at nominal input, full load and 25 oc otherwise noted input range output voltage output current @full load input current @ no load efficiency maximum capacitor load model number vdc vdc ma ma % f pdl06-05s3p3 4.5 ~ 9 3.3 1300 65ma 77 6600 pdl06-05s05 4.5 ~ 9 5 1200 105ma 81 3300 pdl06-05s09 4.5 ~ 9 9 666 105ma 83 2000 pdl06-05s12 4.5 ~ 9 12 500 105ma 84 1600 pdl06-05s15 4.5 ~ 9 15 400 105ma 84 1400 pdl06-05s24 4.5 ~ 9 24 250 105ma 84 680 PDL06-05D05 4.5 ~ 9 5 600 105ma 81 2000 pdl06-05d12 4.5 ~ 9 12 250 105ma 84 900 pdl06-05d15 4.5 ~ 9 15 200 105ma 84 660 pdl06-12s3p3 9 ~ 18 3.3 1300 40ma 78 6600 pdl06-12s05 9 ~ 18 5 1200 55ma 83 3300 pdl06-12s09 9 ~ 18 9 666 55ma 85 2000 pdl06-12s12 9 ~ 18 12 500 55ma 85 1600 pdl06-12s15 9 ~ 18 15 400 55ma 85 1400 pdl06-12s24 9 ~ 18 24 250 55ma 84 680 pdl06-12d05 9 ~ 18 5 600 55ma 82 2000 pdl06-12d12 9 ~ 18 12 250 55ma 84 900 pdl06-12d15 9 ~ 18 15 200 55ma 85 660 pdl06-24s3p3 18 ~ 36 3.3 1300 20ma 78 6600 pdl06-24s05 18 ~ 36 5 1200 28ma 83 3300 pdl06-24s09 18 ~ 36 9 666 28ma 85 2000 pdl06-24s12 18 ~ 36 12 500 28ma 86 1600 pdl06-24s15 18 ~ 36 15 400 28ma 86 1400 pdl06-24s24 18 ~ 36 24 250 28ma 85 680 pdl06-24d05 18 ~ 36 5 600 28ma 82 2000 pdl06-24d12 18 ~ 36 12 250 28ma 85 900 pdl06-24d15 18 ~ 36 15 200 28ma 85 660 pdl06-48s3p3 36 ~ 75 3.3 1300 14ma 78 6600 pdl06-48s05 36 ~ 75 5 1200 14ma 82 3300 pdl06-48s09 36 ~ 75 9 666 14ma 84 2000 pdl06-48s12 36 ~ 75 12 500 14ma 85 1600 pdl06-48s15 36 ~ 75 15 400 14ma 86 1400 pdl06-48s24 36 ~ 75 24 250 14ma 84 680 pdl06-48d05 36 ~ 75 5 600 14ma 82 2000 pdl06-48d12 36 ~ 75 12 250 14ma 84 900 pdl06-48d15 36 ~ 75 15 200 14ma 85 660 part number structure pdl06 - 48 s 05 h series name input output output assembly option voltage quantity voltage (vdc) (vdc) 05: 4.5~9 s: single 3p3: 3.3 : standard 12: 9~18 05: 5 h: plastic case with 24: 18~36 09: 9 3000vdc isolation 48: 36~75 12: 12 m: metal case with 15: 15 1600vdc isolation 24: 24 d: dual 05: 5 12: 12 15: 15 pdl06 series dc-dc converter 2:1 ultra wide input range up to 6watts
pdl06 page 1 of 4 www.pduke.com 2013/04/19 input specifications parameter conditions min. typ. max. unit operating input voltage range 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 4.5 9 18 36 5 12 24 48 9 18 36 75 vdc start up voltage 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 4.5 9 18 36 vdc shutdown voltage 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 3.5 7 15 33 vdc start up time constant resistive load power up remote on/off 30 30 ms input surge voltage 1 second, max. 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 15 25 50 100 vdc input reflected ripple current (1) 5vin(nom) 12vin(nom) 24vin(nom) 48vin(nom) 30 30 30 30 map-p input filter capacitor type dc-dc on open or high impedance referenced to ?input pin and ctrl pin applied current dc-dc off 2 3 4 ma remote on/off remote off input current 2.5 ma output specifications parameter conditions min. typ. max. unit voltage accuracy -1.0 +1.0 % line regulation low line to high line at full load -0.2 +0.2 % load regulation no load to full load single dual -1.0 -1.0 +1.0 +1.0 % cross regulation asymmetrical load 25%/100% fl dual -5.0 +5.0 % ripple and noise measured by 20mhz bandwidth 50 75 mvp-p temperature coefficient -0.02 +0.02 %/ transient response recovery time 25% load step change 500 s short circuit protection continuous, automatics recovery general specifications parameter conditions min. typ. max. unit isolation voltage 1 minute input to output input (output) to case standard type suffix ?h? suffix ?m? suffix ?m? 1600 3000 1600 1000 vdc isolation resistance 500vdc 1 g isolation capacitance standard type suffix ?h? suffix ?m? 50 50 50 pf switching frequency 100 khz design meet safety standard iec60950-1, ul60950-1, en60950-1 case material standard type suffix ?h? suffix ?m? non-conductive black plastic non-conductive black plastic copper base material none potting material silicon (ul94-v0) dimensions 0.86 x 0.36 x 0.44 inch (21.8 x 9.1 x 11.2 mm) weight standard type suffix ?h? suffix ?m? 4.8g (0.17oz) 4.8g (0.17oz) 5.9g (0.21oz) bellcore tr-nwt-000332 case 1: 50% stress, ta= 40 . mtbf mil-hdbk-217f ta=25 , full load (g/b, controlled environment) standard type suffix ?h? suffix ?m? 2.097 x 10 6 hrs 7.705 x 10 5 hrs 7.705 x 10 5 hrs 9.987 x 10 5 hrs
pdl06 page 2 of 4 www.pduke.com 2013/04/19 environmental specifications parameter conditions min. typ. max. unit operating ambient temperature without derating standard type suffix ?h? suffix ?m? -40 -40 -40 +65 +65 +70 storage temperature range standard type -55 +125 thermal shock mil-std-810f vibration mil-std-810f relative humidity 5% to 95% rh emc specifications parameter conditions level emi (1) en55022 class a, classb esd en61000-4-2 air 8kv contact 6kv perf. criteria a radiated immunity en61000-4-3 10 v/m perf. criteria a fast transient (2) en61000-4-4 2kv perf. criteria a surge (2) en61000-4-5 1kv perf. criteria a conducted immunity en61000-4-6 10 vr.m.s perf. criteria a note: 1. the pdl06 series standard module meets emi class a or class b and input reflected ripple current only with external components. for more detail information, please contact with p-duke. 2. an external input filter capacitor is required if the module has to meet en61000-4-4, en61000-4-5. the filter capacitor power mate suggest: 5 vdc input : nippon chemi-con ky series, 330 f/50v. others : nippon chemi-con ky series, 220 f/100v. caution: this power module is not internally fused. an input line fuse must always be used. characteristic curve pdl06-48s05 derating curve pdl06-48s05-m derating curve pdl06-48s05 efficiency vs input voltage pdl06-48s05 efficiency vs output load
pdl06 page 3 of 4 www.pduke.com 2013/04/19 mechanical drawing standard plastic case *nc pin for standard. **no pin for 3kv isolation. (p/n suffix ?h?) 1. all dimensions in inch (mm) tolerance: x.xx 0.02 (x.x 0.5) x.xxx 0.01 (x.xx 0.25) 2. pin pitch tolerance 0.01(0.25) 3. pin dimension tolerance 0.004 (0.1) pin connection pin single dual 1 -input -input 2 +input +input 3 ctrl ctrl 5 nc*/no pin** nc*/no pin** 6 +output +output 7 -output common 8 nc -output option suffix ?m? metal case 1. all dimensions in inch (mm) tolerance: x.xx 0.02 (x.x 0.5) x.xxx 0.01 (x.xx 0.25) 2. pin pitch tolerance 0.01(0.25) 3. pin dimension tolerance 0.004 (0.1) pin connection pin single dual 1 -input -input 2 +input +input 3 ctrl ctrl 5 nc nc 6 +output +output 7 -output common 8 nc -output 9 case case 10 stand off stand off 11 stand off stand off 12 case case
|
